Wood surface must be clean, frost-free, and without existing paints, varnishes, or latex stains. Wet deck prior to application of Reviver Gel.
Method of Application
Begin by removing all settled dust and debris with a sturdy broom or brush. Osmo Wood Reviver Power Gel is ready to use. Do not dilute. Using a clean hard bristle brush, dip the brush directly into the gel to load the brush liberally. Brush thoroughly into the wood following the wood grain. Use a clean paint brush to apply the gel along edges and hard to reach areas. After approximately 20 minutes, wash the product off using plenty of water.
Number of Coats Required
One coat; brushed on, brushed and rinsed off.
Allow approximately 48 hours - assuming sufficient ventilation – before applying finish.
1 Liter covers approximately 100-325 sq. ft. per coat
0.5 liter – covers approximately 50 – 160 sq. ft. per coat
2.5L – covers approximately 250-810 sq. ft. per coat (deck scrubber included with 2.5L)
Product is compatible with: Osmo Deck Oil, Osmo One Coat Only, Osmo Clear Oil Wood Finish, and other micro-porous stains or semi-oil finishes.
Cleaning of Tools
Clean tools with plenty of water