Green Products Winter Advisory
Green Depot Twitter Green Depot Facebook Page Epa Winner WBENC Business Pinterest Page Houzz Page

Osmo Wood Reviver Power Gel

Decking Finishes

  • Exterior wood preparation liquid cleaner that rejuvenates, refreshes and cleans gray, weathered wood decking and exterior furniture
  • Revives resilience and color without damaging wood grain
  • Ready to use, no need to mix or measure
  • Prepares wood for Osmo Deck Oil
  • Brush it on, wash it off (no neutralizer required)
  • High coverage rate: 1 liter covers approximately 100-325 square feet per coat depending on level of wear.
  • Available in 2.5 and 0.5 liter cans (large can includes scrub brush)
  • 0-VOC, biologically degradable, and contains no biocides or preservatives

Osmo Wood Reviver Power Gel rejuvenates, revitalizes, refreshes, and returns resilience to exterior wood that has been dulled, grayed, and weathered. In one application on raw wood, Osmo Wood Reviver Power Gel restores the natural character of exterior woodwork to near its original color. Osmo Wood Reviver Power Gel is a zero VOC, single component product with no measuring or mixing needed. No neutralizer required.

Once you have rejuvenated your deck or patio furniture with Osmo Wood Reviver Power Gel, we recommend finishing it with Osmo Deck Oil to keep it looking great into the future.

  • 0-VOC
  • Biodegradable
  • Contains no biocides or preservatives

Surface Preparation
Wood surface must be clean, frost-free, and without existing paints, varnishes, or latex stains. Wet deck prior to application of Reviver Gel.

Method of Application
Begin by removing all settled dust and debris with a sturdy broom or brush. Osmo Wood Reviver Power Gel is ready to use. Do not dilute. Using a clean hard bristle brush, dip the brush directly into the gel to load the brush liberally. Brush thoroughly into the wood following the wood grain. Use a clean paint brush to apply the gel along edges and hard to reach areas. After approximately 20 minutes, wash the product off using plenty of water.

Number of Coats Required
One coat; brushed on, brushed and rinsed off.

Drying Time
Allow approximately 48 hours - assuming sufficient ventilation – before applying finish.

1 Liter covers approximately 100-325 sq. ft. per coat

Container sizes
0.5 liter – covers approximately 50 – 160 sq. ft. per coat
2.5L – covers approximately 250-810 sq. ft. per coat (deck scrubber included with 2.5L)

Product is compatible with: Osmo Deck Oil, Osmo One Coat Only, Osmo Clear Oil Wood Finish, and other micro-porous stains or semi-oil finishes.

Cleaning of Tools
Clean tools with plenty of water

Osmo Wood Reviver Power Gel

Colors shown will vary based on screen settings and should not be taken as exact representations of actual product.

See below for related products

What Makes It Green?
Additional Green-Related Info
Product Stories